Products

30 – 512 MHz V/UHF whip antenna for handheld/manpack radios

This product is a wideband monopole whip antenna, primarily intended for use with handheld and manpack radios operating in VHF/UHF frequency range from 30 to 512 MHz. The antenna is composed of radiating part made of bendable tape radiator providing high flexibility and roughness. A unique low loss matching network is placed above the connector, ensuring good VSWR and gain response across the entire frequency band. The connector is male type TNC which is designed with inner part intended for electrical connection between the radio unit, middle part which is intended to hold the antenna in position and outer part which is intended to fasten the antenna firmly on the radio connector.

Datasheet

225 – 512 MHz Wideband whip antenna for handheld/manpack radios

This product is a wideband monopole whip antenna, primarily intended for use with handheld and manpack radios in UHF frequency range from 225 to 512 MHz. The antenna is composed of radiating part made of bendable tape radiator providing high flexibility and roughness. A unique low loss matching network is placed above the connector, ensuring good VSWR and gain response across the entire frequency band. The connector is male type TNC which is designed with inner part intended for electrical connection between the radio unit, middle part which is intended to hold the antenna in position and outer part which is intended to fasten the antenna firmly on the radio connector.

Datasheet

1560 – 1610 MHz GNSS antenna

This product is a mobile GNSS active receiving antenna providing at least 25 dBi of gain intended for use with portable GPS receivers. The frequency coverage of the antenna is 1560 – 1610 MHz which encompasses the entire GNSS frequency band and thus supports GPS, GALILEO, GLONASS and BEIDOU systems. The connector is SMA male type making it compatible with handheld radios containing GPS receivers. Other connector types can also be supplied on request.

Datasheet

380 – 400 MHz Helical and GNSS Hand-held Radio Antenna

This product consists of a short helical antenna covering frequency range from 380 to 400 MHz and it is intended to be used with handheld radios for public safety applications. A second antenna operating at upper L band (1560 – 1610 MHz) for GNSS applications is also included within the helical antenna. Using an SMA male type connector this product can be considered as a dual band antenna which has a power handling capability of 10 Watts at the UHF band. Electrically the UHF antenna part is designed as a helical type and the GNSS one as a passive monopole type. All metal parts of the antenna are enclosed in a tube made of Thermoplastic Polyurethane ensuring flexibility and long life time.

Datasheet

146 – 159 MHz Helical Hand-held Radio Antenna

This product consists of a short helical antenna covering frequency range from 146 to 159 MHz and it is intended to be used with handheld radios for public safety applications. A second antenna operating at upper L band (1560 – 1610 MHz) for GNSS applications is also included within the helical antenna. Using an SMA male type connector this product can be considered as a dual band antenna which has a power handling capability of 10 Watts at the VHF band. Electrically the VHF antenna part is designed as a helical type and the GNSS one as a passive monopole type. All metal parts of the antenna are enclosed in a tube made of Thermoplastic Polyurethane ensuring flexibility and long life time.

Datasheet

Roof Top Combination Antenna (VHF, WiFi, GPS)

This product incorporates three antennas operating at 149-159 MHz for public safety, 157-1579 MHz for GPS and 2400-2500 MHz for WiFi applications. While GPS and WiFi antennas are enclosed inside a shark fin structure, a special connector is installed on the structure for VHF whip antenna which is accompanying the product. The small form factor of the shark fin makes it easy to install on vehicles or buildings where WiFi and global navigation is required while providing rugged impact resistant housing. This product is designed to withstand impact as well as water and dust intrusion, rating the product as IP67 ingress protection code. Three coaxial cables with three different lengths and terminations are assembled on the product. Originally the cable lengths and connector types are as follows:
 Male type FME connector for VHF whip antenna,
 Female type FME connector for GPS antenna,
 Female type SMA connector for WiFi antenna.

The antenna can be configured with different cable types, in varying lengths and with various connector types.

Datasheet

Roof Top Combination Antenna (UHF, WiFi, GPS)

This product incorporates three antennas operating at 380-400 MHz for public safety, 157-1579 MHz for GPS and 2400-2500 MHz for WiFi applications. While GPS and WiFi antennas are enclosed inside a shark fin structure, a special connector is installed on the structure for UHF whip antenna which is accompanying the product. The small form factor of the shark fin makes it easy to install on vehicles or buildings where WiFi and global navigation is required while providing rugged impact resistant housing. This product is designed to withstand impact as well as water and dust intrusion, rating the product as IP67 ingress protection code. Three coaxial cables with three different lengths and terminations are assembled on the product. Originally the cable lengths and connector types are as follows:
 Male type FME connector for UHF whip antenna,
 Female type FME connector for GPS antenna,
 Female type SMA connector for WiFi antenna.

The antenna can be configured with different cable types, in varying lengths and with various connector types.

Datasheet

380 – 400 MHz Fixed-site Antenna

This product is a 1.4 m long collinear monopole antenna operating at the UHF frequency band of 380-400 MHz with 3dBd (5.1 dBi) of gain. Using female N-type connector, it is developed for use on fixed sites like base stations, roof tops, ships and masts. Low VSWR and proper material and topology selection in the design of the antenna result in more than 150 W power handing capability for this product. Free mounting and as high as possible is most preferable for this antenna, otherwise the VSWR and the radiation pattern will be influenced. Just avoid mounting the antenna parallel with and in the neighborhood of other metal parts. For lightning protection the antenna consists of a grounded radiator and therefore it shows a DC-short across the input port. A glass fiber tube completely encloses the accurately designed radiating element as well as the matching circuitry section to ensure long life in all climates.

Datasheet

151 – 159 MHz Repeater Antenna

This product is a 6.2 m long collinear monopole antenna operating at the VHF frequency band of 151-159 MHz with 5dBd (7.1 dBi) of gain. Using female N-type connector, it is developed for use on fixed sites like base stations, roof tops, ships and masts, as repeater antenna. Low VSWR and proper material and topology selection in the design of the antenna result in maximum power handling capability of 500 W for this product. Free mounting and as high as possible is most preferable for this antenna, otherwise the VSWR and the radiation pattern will be influenced. Just avoid mounting the antenna parallel with and in the neighborhood of other metal parts. For lightning protection the antenna consists of a grounded radiator and therefore it shows a DC-short across the input port. A glass fiber tube completely encloses the accurately designed radiating element, as well as the matching circuitry section to ensure long life in all climates.

Datasheet